How To Replace Rear Brakes On A 2013 Audi A7

How to Replace Rear Brakes 200713 Toyota Tundra YouTube from www.youtube.com

Replacing the rear brakes on your 2013 Audi A7 can seem like a daunting task, but with the right tools and some basic knowledge, it can be done in just a few hours. Properly maintaining your brakes is crucial for the safety of you and your passengers, and can save you money in the long run. In this article, we will guide you through the steps to replace the rear brakes on your Audi A7.

Gather Your Tools and Supplies

Before you begin, you will need to gather the necessary tools and supplies. You will need a jack, jack stands, lug wrench, socket wrench, C-clamp or brake piston tool, new brake pads, and brake grease. Make sure that you have all the necessary tools before you begin the process. It is also a good idea to wear gloves and eye protection throughout the process.

Step 1: Prepare Your Vehicle

First, park your Audi A7 on a level surface and engage the emergency brake. Loosen the lug nuts on the rear wheels with a lug wrench, but do not remove them yet. Next, place the jack under the rear of the vehicle and lift it until the tires are off the ground. Place the jack stands under the car to ensure stability. Finally, remove the lug nuts and take off the rear wheels.

Step 2: Remove the Caliper

The next step is to remove the caliper from the disc. Use a socket wrench to loosen and remove the bolts that hold the caliper in place. Carefully lift the caliper off the disc and support it with a wire or bungee cord so that it does not hang from the brake line.

Replace the Brake Pads

Step 3: Remove the Old Brake Pads

The next step is to remove the old brake pads. Use a C-clamp or brake piston tool to compress the piston in the caliper until it is flush with the caliper body. This will create enough space to remove the old brake pads. Carefully remove the pads and inspect them for wear.

Step 4: Install the New Brake Pads

Next, apply brake grease to the back of the new brake pads and carefully insert them into the caliper. Make sure that the pads are correctly aligned with the disc. You may need to push the piston back further to accommodate the thickness of the new pads.

Step 5: Reinstall the Caliper and Wheels

Once the new brake pads are in place, carefully lower the caliper back onto the disc and tighten the bolts to the manufacturer's specifications. Finally, replace the rear wheels and tighten the lug nuts. Lower the vehicle back to the ground and tighten the lug nuts again.

Conclusion

Replacing the rear brakes on your 2013 Audi A7 is a relatively simple process that can be done in just a few hours. Properly maintaining your brakes is crucial for the safety of you and your passengers, and can save you money in the long run. With the right tools and some basic knowledge, you can easily replace the rear brakes on your Audi A7 at home. Remember to always wear gloves and eye protection, and consult a professional if you are unsure about any part of the process.

Good luck with your brake replacement!